8 common reasons why your washing machine won't turn on

Tuesday, 08 March 2022
435

Do you have any solution for your washing machine not turning on? You definitely know a lot about using your washer, which detergent to use or how to clean the door gasket or even how to level your appliance. But not turning on is a bigger problem for a washing machine to be solved easily.

Before removing this major problem, you should know the reasons. We recommend to study the article about "washing machine parts and their functions" first to follow us more easily in this article to turn your washer back on.

Here we are going to speak about 8 common reasons of a washing machine not turning on and the ways to solve this problem.

Warning: unplug the washing machine before starting any troubleshooting or repair operation to avoid electric shock

Faulty power supply doesn't let the washing machine turn on

The first and most important reason for a washer not turning on is the power cut. Check the washer is properly plugged in. Sometimes the washer vibration makes it unplug. Check if there is any current present. Check the socket using another appliance like a hairdryer. If it doesn't turn on too, the circuit breaker may have tripped.

Wrong washing program can stop the washing machine from turning on

8 common reasons why your washing machine wont turn on 1

Maybe you have put the washer on delay wash program. In this case, it will take time for the washing machine to turn on. If there is a rotary switch to adjust the program, maybe the selector is stuck between two programs or maybe you have forgotten to push the start button.

Tip: the faulty start switch can also prevent the washer from turning on. So, you should replace it.

Improperly closed door can be a cause for the washing machine not turning on

The washing machine door has a safety lock to prevent it from opening during the wash cycle. If the door is not properly closed, the lock doesn't send the message to the board to start the wash cycle.

Note: maybe the door gasket has displaced and prevents the door from closing. Fix it and make sure the door is completely closed.

Faulty door safety lock prevents the washer from turning on

8 common reasons why your washing machine wont turn on 2

As explained above, the washer door has a safety mechanism that doesn't let the door open during the wash cycle. If this component is faulty, the control board doesn't get the message and the washer won't turn on.

Tip: a faulty door latch can also be a reason for washer not turning on. It can't activate the lock and should be replaced.

Faulty solenoid valve doesn't let the washer turn on

8 common reasons why your washing machine wont turn on 3

The solenoid valve controls the water supply into the washing machine. Any disruption of water flow into the washer, can cause the washing machine not to turn on. So, a damaged solenoid valve can be a reason for this problem. Also check the filter between the supply hose and the solenoid valve for not being clogged. Replace it if necessary.

Faulty motor is an important reason for washing machine not turning on

8 common reasons why your washing machine wont turn on 4

Motor rotates the washer drum. So, if it is faulty, the washer won't turn on.

If the motor is constantly turning on and off, it is faulty and should be repaired or replaced.

Tip: sometimes you can make sure about the motor condition just by listening to its noise. A faulty motor usually has an increasing humming or buzzing noise. We have talked about all washer unusual noises in an article with the same name.

Faulty start button or timer prevent the washing machine from turning on

8 common reasons why your washing machine wont turn on 5

As you know, pressing the start button initiates the washing cycle in the washing machine and timer adjusts the timing of the cycles. If these tiny components are defective, there is no choice but to replace them.

Faulty control board doesn't let the washing machine turn on

8 common reasons why your washing machine wont turn on 6

The control board is in fact the brain of the washing machine and controls all the washer functions. If you have checked all the factors above and there is no problem, the control board may be the culprit and should be replaced.

Note: the board replacing is so costly. So, first make sure there isn't any other reason for the washer not turning on.

The reasons mentioned here for the washer not turning on, can be easily found and removed. If you have encountered any problem not under your control, call a technician. You yourself can also be a washer technician using washing machine training course in HelloTechnic website. You will learn everything about washing machine installation, service, troubleshooting and repair to start your job as a repairman.